Introduction
MechoShade possesses a variety of Line Voltage Switches for basic control of shades equipped with standard, line voltage (120/240 VAC, 50/60 Hz) tubular motors. The motors wire directly to the switches that control them in a hardwired, homerun (direct) fashion and therefore do not require any intermediate controller electronics. The switches are single-pole/double-throw (SPDT) and double-pole, double-throw (DPDT) center-off devices that offer the control of one or two motorized shading assemblies in an isolated fashion from a common switch. |
|
Features
• Most economical control solution
• Best wired into renovate/new construction projects
• Shade operation is typically full-up/full-down where absolute alignment with another shade group is not a priority
• Switches can be selected for operation in a momentary or maintained fashion to accommodate the user's requirements
• If mid-window settings are required the user stops the shade when it reaches the desired position
• These switches can operate up to two separate motors simultaneously
• Comes in a variety of styles and colors to suit virtually any decor.
• Meet the various local and national building codes for indoor usage
• Certified to UL and CSA recognized component standards
• Switch series have been further qualified by ETL under stringent system testing requirements with regard to their application under UL325 and CSA 22.2 along with all of MechoShade's available motors and hardware |
